產品列表PRODUCTS LIST
二乙烯基苯C6H4(CHCH2)2氣體檢測管158S DIVINYL BENZENE 5-50ppm， 在冬季和夏季使用檢測管，會有什么影響嗎？基本上檢測管在0-40度之間使用是不會有影響的。請參考各檢測管使用說明書?！癝EI"認證是什么？“安全設備學會Safety Equipment Institute(SEI)"—上Z為嚴格的認證之一
更新時間：2025-12-23
在線留言
二乙烯基苯C6H4（CHCH2）2氣體檢測管158S DIVINYL BENZENE 5-50ppm
Tube 58S
1. PERFORMANCE
1） Measuring range ：5-300 ppm 2.5-150 ppm
Number of pump strokes 1（100ml） 2（200ml）
2） Sampling time ：1 minute/1 pump stroke
3） Detectable limit ：0.5 ppm（200ml）
4） Shelf life ：3 years
5） Operating temperature ：0～40℃
6） Reading ：Direct reading from the scale calibrated by 1 pump stroke
7） Colour change ：White→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：15％ RSD-high : 10％
3. CHEMICAL REACTION
A polymer of Styrene is produced by sulphuric acid.
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
300
250
200
150
100
50
20
5
ppm
GAS To pump
158S STYRENE
Substance ppm Interference ppm Coexistence
Acrylonitrile FIG.1 Tafhfeec atecdc.uracy of readings is not 400 Lower readings are given.
Butadiene 3 Similar stain is produced. 5 Uneven discolouration is produced
FIG.2 and higher readings are given.
Formaldehyde 〃15 Yellowish orange stain is produced
FIG.3 and higher readings are given.
Acetaldehyde 〃350 Similar stain is produced and
higher readings are given.
Methyl alcohol The accuracy of readings is not 0.35％ Pale discolouration is produced
affected. and higher readings are given.
Ethyl alcohol 〃0.18％ 〃
Ethyl acetate 〃700 〃
Butyl acetate 〃700 〃
（NOTE）
In case of 2 pump strokes, following formula is available for actual concentration.
Actual concentration＝1/2×Reading value.
0
200
100
Acrylonitrile Butadiene
FIG.1 Influence of Acrylonitrile Styrene indicating value 〔
ppm〕
500 1000 0
200
100
FIG.2 Influence of Butadiene
Styrene indicating value 〔ppm〕
〔ppm〕? 50 100 0
200
100
Formaldehyde
FIG.3 Influence of Formaldehyde
上一篇：240S硅烷Si2H6氣體檢測管SILANE 240S 1-50ppm 乙硅烷Disilane檢測管
下一篇：192S環(huán)氧氯丙烷OCH2CHCH2Cl氣體檢測管192S EPICHLOROHYDRIN 5-50ppm
返回列表>>相關產品
發(fā)郵件給我們：554328895@qq.com
